5CEBA2F13C6SC datasheet(31/37 Pages) INTEL

31 / 37 page

Note:

Although the FPGA fabric and HPS are on separate power domains, the HPS must

remain powered up during operation while the FPGA fabric can be powered up or down

as required.

Related Information

Cyclone V Device Family Pin Connection Guidelines

Provides detailed information about power supply pin connection guidelines and

power regulator sharing.

Hardware and Software Development

For hardware development, you can configure the HPS and connect your soft logic in

the FPGA fabric to the HPS interfaces using the Platform Designer (Standard) system

integration tool in the Intel Quartus Prime software.

For software development, the Arm-based SoC devices inherit the rich software

development ecosystem available for the Arm Cortex-A9 MPCore processor. The

software development process for Intel SoCs follows the same steps as those for other

SoC devices from other manufacturers. Support for Linux, VxWorks®, and other

operating systems is available for the SoCs. For more information on the operating

systems support availability, contact the Intel sales team.

You can begin device-specific firmware and software development on the Intel SoC

Virtual Target. The Virtual Target is a fast PC-based functional simulation of a target

development system—a model of a complete development board that runs on a PC.

The Virtual Target enables the development of device-specific production software that

can run unmodified on actual hardware.

Related Information

International Altera Sales Support Offices

Dynamic and Partial Reconfiguration

The Cyclone V devices support dynamic reconfiguration and partial reconfiguration.

Dynamic Reconfiguration

The dynamic reconfiguration feature allows you to dynamically change the transceiver

data rates, PMA settings, or protocols of a channel, without affecting data transfer on

adjacent channels. This feature is ideal for applications that require on-the-fly

multiprotocol or multirate support. You can reconfigure the PMA and PCS blocks with

dynamic reconfiguration.

Partial Reconfiguration

Note:

The partial reconfiguration feature is available for Cyclone V E, GX, SE, and SX devices

with the "SC" suffix in the part number. For device availability and ordering, contact

your local Intel sales representatives.

Partial reconfiguration allows you to reconfigure part of the device while other sections

of the device remain operational. This capability is important in systems with critical

uptime requirements because it allows you to make updates or adjust functionality

without disrupting services.

Cyclone V Device Overview

683694 | 2018.05.07

Send Feedback

Cyclone V Device Overview

5CEBA2F13C6SC 데이터시트(PDF) 31 Page - Intel Corporation

5CEBA2F13C6SC 데이터시트(HTML) 31 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

데이터시트 다운로드

링크 URL