| 전자부품 데이터시트 검색엔진 |
|
TMS320F 데이터시트(PDF) 83 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TMS320F 데이터시트(HTML) 83 Page - Texas Instruments |
|
83 / 389 page ![]() CPU Interrupt Registers 5-19 Program Control Bit 0 INT1. Interrupt 1 flag. This bit is the flag for interrupts connected to interrupt level INT1. 0 = No INT1 interrupt is pending. 1 = At least one INT1 interrupt is pending. Write a 1 to this bit to clear it to 0 and clear the interrupt request. 5.7.2 Interrupt Mask Register (IMR) The IMR is a 16-bit, memory-mapped register located at address 0004h in data memory space. The IMR contains mask bits for all the maskable interrupt levels (INT1–INT6). Neither NMI nor RS is included in the IMR; thus, IMR has no effect on these interrupts. You can read the IMR to identify masked or unmasked interrupt levels, and you can write to the IMR to mask or unmask interrupt levels. To unmask an interrupt level, set its corresponding IMR bit to 1. To mask an interrupt level, set its corre- sponding IMR bit to 0. When an interrupt is masked, it is not acknowledged, regardless of the value of the INTM bit. When an interrupt is unmasked, it is acknowledged if the corresponding IFR bit is 1 and the INTM bit is 0. At reset, the IMR bits are all set to 0, masking all the maskable interrupts. The IMR is shown in Figure 5–6, Interrupt Mask Register (IMR) on page 5-20. Bit descriptions follow the figure. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |