RF112 datasheet(11/45 Pages) NXP

11 / 45 page

Table 1. Pinout list by bus (continued)

Signal

Signal description

Package

number

type

Power supply

Notes

GND

Ground

1. A 100 Ohms resistor should be placed between this pad and the other polarity pad.

2. In normal mode should be pulled to ground.

3. Application requires pull-down 10 +/-1% KOhm resistor.

4. This pin can be left unconnected since they are configured as inputs with internal pull-down at reset.

5. The 65th pin serves as a ground and thermal pad.

3 Electrical characteristics

This section describes the DC and AC electrical specifications for the chip. This section

describes the DC and AC electrical specifications of the interfaces and signals for the

chip.

3.1 Overall DC electrical characteristics

This section describes the ratings, conditions, and other characteristics.

3.1.1 Absolute maximum ratings

This table provides the absolute maximum ratings.

Table 2. Absolute maximum ratings1,2

Characteristic

Symbol

Min

Max

Unit

Notes

Analog supply voltages

VDD_RX1

VDD_XO

VDD_RO1

VDD_BB1

VDD_SYNTH

VDD_BB2

VDD_RO2

VDD_TRX2

VDD_160M_IO

-0.50

-0.5

2.00

Digital core supply voltage

VDD_DIG_CORE

-0.50

1.00

Digital I/O supply voltage

VDD_DIG_IO

-0.50

2.00

Table continues on the next page...

Electrical characteristics

RF112 Transceiver Data Sheet, Rev. 1 Draft B, 05/2024

NXP Semiconductors

RF112 데이터시트(PDF) 11 Page - NXP Semiconductors

RF112 데이터시트(HTML) 11 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

데이터시트 다운로드

링크 URL