PIC18F44J10-ESLASHML datasheet(211/358 Pages) MICROCHIP

211 / 358 page

Preliminary

DS39682C-page 209

PIC18F45J10 FAMILY

17.0

10-BIT ANALOG-TO-DIGITAL

CONVERTER (A/D) MODULE

The Analog-to-Digital (A/D) converter module has

10 inputs for the 28-pin devices and 13 for the 40/44-pin

devices. This module allows conversion of an analog

input signal to a corresponding 10-bit digital number.

The module has five registers:

• A/D Result High Register (ADRESH)

• A/D Result Low Register (ADRESL)

• A/D Control Register 0 (ADCON0)

• A/D Control Register 1 (ADCON1)

• A/D Control Register 2 (ADCON2)

The ADCON0 register, shown in

controls the operation of the A/D module. The

ADCON1 register, shown in Register 17-2, configures

the functions of the port pins. The ADCON2 register,

shown in Register 17-3, configures the A/D clock

source, programmed acquisition time and justification.

ADCON0: A/D CONTROL REGISTER 0

R/W-0

U-0

R/W-0

ADCAL

—

CHS3

CHS2

CHS1

CHS0

GO/DONE

ADON

bit 7

bit 0

bit 7

ADCAL: A/D Calibration bit

= Calibration is performed on next A/D conversion

= Normal A/D converter operation

bit 6

Unimplemented: Read as ‘0’

bit 5-2

CHS3:CHS0: Analog Channel Select bits

0000

= Channel 0 (AN0)

0001

= Channel 1 (AN1)

0010

= Channel 2 (AN2)

0011

= Channel 3 (AN3)

0100

= Channel 4 (AN4)

0101

= Channel 5 (AN5)(1,2)

0110

= Channel 6 (AN6)(1,2)

0111

= Channel 7 (AN7)(1,2)

1000

= Channel 8 (AN8)

1001

= Channel 9 (AN9)

1010

= Channel 10 (AN10)

1011

= Channel 11 (AN11)

1100

= Channel 12 (AN12

1101

= Unimplemented(2)

1110

= Unimplemented(2)

1111

= Unimplemented(2)

Note 1: These channels are not implemented on 28-pin devices.

2: Performing a conversion on unimplemented channels will return a floating input

measurement.

bit 1

GO/DONE: A/D Conversion Status bit

When ADON = 1:

= A/D conversion in progress

= A/D Idle

bit 0

ADON: A/D On bit

= A/D converter module is enabled

= A/D converter module is disabled

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

PIC18F44J10-E/ML 데이터시트(PDF) 211 Page - Microchip Technology

PIC18F44J10-E/ML 데이터시트(HTML) 211 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL