TDA7546 datasheet(58/68 Pages) STMICROELECTRONICS

58 / 68 page

Software specifications

TDA7546

58/68

If “bne” bit is set, the transfer must be continued by the I2C master, until at least the four

allowed to set the stop condition (Figure 16). Then the whole Buffer must be read out,

by reading each time at least the five registers rds_int, rds_qu, rds_corrp, rds_bd_h

and rds_bd_l without interruption. This must be done until the “bne” bit is set to zero

(last RDS block).

If the I2C master is not able to handle the above protocol, it must read always at least

the first five registers rds_int, rds_qu, rds_corrp, rds_bd_h, rds_bd_l out independent if

“bne” is set or not (Figure 16). If the “bne” flag is set the whole RAM buffer must be

read out, by reading each time at least the five registers rds_int, rds_qu, rds_corrp,

rds_bd_h and rds_bd_l without interruption. This must be done until the “bne” bit is set

to zero (last RDS block).

Note:

In polling mode the interrupt flag “int” is just a indication that the wanted information is stored

within the RAM Buffer.

Note:

In polling mode it is possible that the last RDS data (rds_qu, rds_corrp, rds_bd_h and

rds_bd_l), which was read out as the “bne” flag was set to zero, is identical to the RDS data

before. This must be checked by the external micro controller by comparing the last received

2 RDS blocks. If they are identical, one of them can be skipped. (This is the case if just one

RDS block is stored in the RAM buffer).

Figure 16.

I2C read access example 1: read of 5 bytes

Figure 17.

I2C read access example 2: read of 1 byte

SDA

SCL

START

CONDITION

R ACK

rds_int[7:0]

rds_qu[7:0]

ACK

CSN 1

SLAVE ADDRESS

rds_corrp[7:0]

rds_bd_h[7:0]

rds_bd_l[7:0]

STOP

CONDITION

ACK

SDA

SCL

START

CONDITION

ACK

rds_int[7:0]

CSN 1

SLAVE ADDRESS

STOP

CONDITION

ACK

TDA7546 데이터시트(PDF) 58 Page - STMicroelectronics

TDA7546 데이터시트(HTML) 58 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

데이터시트 다운로드

링크 URL