| 전자부품 데이터시트 검색엔진 |
|
TDA7546 데이터시트(PDF) 26 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TDA7546 데이터시트(HTML) 26 Page - STMicroelectronics |
|
26 / 68 page ![]() Functional description TDA7546 26/68 The last bit of the start instruction defines the type of operation to be performed: – When set to "1", a read operation is selected – When set to "0", a write operation is selected The TDA7512F connected to the bus will compare their own hardwired address with the slave address being transmitted, after detecting a START condition. After this comparison, the TDA7512F will generate an "acknowledge" on the SDA line and will do either a read or a write operation according to the state of R/W bit. Write operation Following a START condition the master sends a slave address word with the R/W bit set to "0". The device will generate an "acknowledge" after this first transmission and will wait for a second word (the word address field). This 8-bit address field provides an access to any of the 32 internal addresses. Upon receipt of the word address the TDA7512F slave device will respond with an "acknowledge". At this time, all the following words transmitted to the TDA7512F will be considered as Data. The internal address will be automatically incremented. After each word receipt the TDA7512F will answer with an "acknowledge". Read operation If the master sends a slave address word with the R/W bit set to "1", the TDA7512F will transit one 8-bit data word. This data word includes the following informations: bit0 (ISS filter, 1 = ON, 0 = OFF) bit1 (ISS filter bandwidth, 1 = 80KHz, 0 = 120KHz) bit2 (MPOUT,1 = multipath present, 0 = no multipath) bit3 (1 = PLL is locked in , 0 = PLL is locked out). bit4 (fieldstrength indicator, 1 = lower as softmute threshold, 0 = higher as softmute threshold) bit5 (adjacent channel indicator, 1 = adjacent channel present, 0 = no adjacent channel) bit6 (deviation indicator, 1 = strong overdeviation present, 0 = no strong overdeviation) bit7 (deviation indicator, 1 = overdeviation present, 0 = no overdeviation) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |