ABSOLUTE MAXIMUM RATINGS

ADS5463

ADS54RF63

SLAS515E – NOVEMBER 2006 – REVISED JULY 2009 ................................................................................................................................................... www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because small parametric changes could cause the device not to meet its published specifications.

PACKAGE/ORDERING INFORMATION

SPECIFIED

PACKAGE

PACKAGE

ORDERING

TRANSPORT MEDIA,

PRODUCT

PACKAGE-LEAD

TEMPERATURE

DESIGNATOR(1)

MARKING

NUMBER

QUANTITY

RANGE

ADS5463IPFP

Tray, 96

HTQFP-80(2)

ADS5463

PFP

–40°C to 85°C

ADS5463I

PowerPAD

ADS5463IPFPR

Tape and reel, 1000

ADS54RF63IPFP

Tray, 96

HTQFP-80(2)

ADS54RF63

PFP

–40°C to 85°C

ADS54RF63I

PowerPAD

ADS54RF63IPFPR

Tape and reel, 1000

(1)

For the most current product and ordering information, see the Package Option Addendum located at the end of this data sheet.

(2)

Thermal pad size: 6.15 mm × 6.15 mm (min), 7.5 mm × 7.5 mm (maximum), see Thermal Pad Addendum located at the end of the data

sheet.

over operating free-air temperature range (unless otherwise noted)

(1)

ADS5463/ADS54RF63

UNIT

AVDD5 to GND

6

Supply voltage

AVDD3 to GND

5

V

DVDD3 to GND

5

AC Signal

–0.3 to (AVDD5 + 0.3)

AIN, AIN to GND(2)

Voltage difference between pin and ground

DC signal, TJ = 105°C

0.4 to 4.4

V

DC signal, TJ = 125°C

1.0 to 3.8

AC Signal

-5.2 to 5.2

AIN to AIN(2)

Voltage difference between these pins

DC Signal, TJ = 105°C

-4.0 to 4.0

V

DC signal, TJ = 125°C

-2.8 to 2.8

AC signal

–0.3 to (AVDD5 + 0.3)

CLK, CLK to GND(2)

Voltage difference between pin and ground

DC signal, TJ = 105°C

0.1 to 4.7

DC signal, TJ = 125°C

1.1 to 3.7

V

AC Signal

-3.3 to 3.3

CLK to CLK(2)

Voltage difference between these pins

DC signal, TJ = 105°C

-3.3 to 3.3

V

DC signal, TJ = 125°C

-2.6 to 2.6

Data output to

LVDS digital outputs

–0.3 to (DVDD3 + 0.3)

V

GND(2)

Operating temperature range

–40 to 85

°C

Maximum junction temperature (max TJ)

150

°C

Storage temperature range

–65 to 150

°C

ESD, human-body model (HBM)

2

kV

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied. Kirkendall voidings and current density information for calculation of expected lifetime is available upon

request.

(2)

Valid when supplies are within recommended operating range.

2

Submit Documentation Feedback

Copyright © 2006–2009, Texas Instruments Incorporated

Product Folder Link(s): ADS5463 ADS54RF63