L9663 datasheet(76/106 Pages) STMICROELECTRONICS

76 / 106 page

Communication interface

L9663

76/106

DS11401 Rev 6

ADVSET2 (PROG)

Advanced Settings 2

Address:

101111

Type:

R/W

Description:

Advanced settings for interface 2

Default value:

000

R/W

[15] REACTTIME: Reaction time for FLL module reset after error detection

0: 0ms

1: 20ms

[14:13] RESERVED

[12] BITTIME_H_DET2: Manchester decoder Bit time error detect on PSI2

0: bittime too high error is not detected as error

1: bittime too high error is detected as error

[11] PERIOD_M_DIS2: Disable bit time Period measurement for frame decoding on PSI2

0: measurement of start bits period enabled

1: measurement of start bits period disabled

[10] STBIT_DC_CK_DIS2: Duty cycle check (DC>0.25) on start bits

0: duty cycle check enabled

1: duty cycle check disabled

[9] STBITERR_RST_CNT2: Manchester decoder Bit counter reset upon start bit error

0: start bit error does not reset the counter

1: start bit error resets the counter

[8:7] RESERVED

[6] BITTIME_H_DET1: Manchester decoder Bit time error detect on PSI1

0: bittime too high error is not detected as error

1: bittime too high error is detected as error

[5] PERIOD_M_DIS1: Disable bittime Period measurement for frame decoding on PSI1

0: measurement of start bits period enabled

1: measurement of start bits period disabled

L9663 데이터시트(PDF) 76 Page - STMicroelectronics