PQ201 datasheet(22/42 Pages) PICO

22 / 42 page

PicoScope® 6000E Series

Measurements: pass/failure limits

PicoScope software offers pass/failure limits for any measurement. This gives a visual indication within

the measurement window whenever the measurement result goes above or below a specified value.

Pass/failure limits can be combined with actions to immediately alert the user or execute other actions

when a measurement threshold has been exceeded, either above or below set limits.

By filtering the waveform buffer to show only those waveforms failing a measurement limit, you can

quickly identify points of interest out of the thousands of waveforms captured in the deep memory of your

PicoScope.

Measurements: logging

PicoScope allows results of measurements

to be recorded to a file for later analysis. The

resulting log can be used to characterize the

performance of a circuit over medium or long-

duration tests – such as when evaluating drift

due to thermal and other effects, or can be used

to check functionality against an externally

controlled variable such as supply voltage.

The maximum number of rows recorded is

limited by the user-set constraints or disk

capacity.

PQ201 데이터시트(PDF) 22 Page - Pico Technology Ltd.