9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

NOTE: On the rear of the

battery are 3 red power

indicator lights. Press the

power indicator button

to show how much

power the battery has.

• 1 Light: Low power

•2 Lights: Medium power

• 3 Lights: High power

The battery pack should slide in easily. If it is not to be fitted immediately,

ensure that the metal contacts are protected to avoid the possibility of a short

circuit which would cause battery damage. For maximum battery life, we

recommend that you maintain the battery in a fully charged state.

OPERATION

FITTING A SOCKET

1. Align the chosen socket and

simply push it onto the anvil. Use

only ½” square drive impact

sockets as listed on page 11.

2. Select Forward or Reverse on the

selector bar.

3. Squeeze the trigger to start the

impact wrench. Release the

trigger to stop.

CAUTION: MAKE SURE THAT THE IMPACT WRENCH IS OFF USING THE

SELECTOR BAR BEFORE ATTACHING OR REMOVING A SOCKET. ALWAYS

TAKE CARE TO USE THE CORRECT SIZE SOCKET FOR BOLTS AND NUTS. AN

INCORRECT SOCKET WILL CAUSE DAMAGE TO THE BOLT OR NUT.