11

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BELT HOOK

The impact wrench is provided with a

belt hook. This can be fitted to either

side of the main housing, adjacent to

the battery and is retained by a

single screw.

MAINTENANCE

All bearings etc, in this wrench are lubricated with a sufficient amount of high

grade lubricant for the machines lifetime under normal operating conditions,

therefore no further lubrication is required.

Refer to your CLARKE dealer if internal maintenance is required.

Check the battery charger power cable to ensure it is free from cracks, bare

wires etc.

Avoid using solvents when cleaning plastic parts, most plastics are susceptible

to damage from the various types of commercial solvents. Keep the unit clean

by wiping with a dry cloth. DO NOT use solvents as a cleaning agent.

Your CLARKE impact wrench has been designed to give long and trouble free

service. If, however, having followed the instructions in this booklet carefully,

you encounter problems, take the unit to your local CLARKE dealer.

Always store the wrench and its charger in the case supplied. Store in a clean,

dry place, out of reach of children when not in use.

ACCESSORIES

A wide range of impact wrench accessories are available from your nearest

CLARKE dealer, for further information, contact your nearest dealer, or

telephone CLARKE International Sales department on 01992 565300.

Suitable impact wrench socket sets include the following:

Part No

Model No

Description

3110875

CIS12/10

1/2” Drive Impact Socket Set

3110437

CIS12/11

11 Piece Impact Socket Set