 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
CSG14K_CSG8K 데이터시트(PDF) 24 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
CSG14K_CSG8K 데이터시트(HTML) 24 Page - ams-OSRAM AG |
|
|
24 / 114 page  Document Feedback CSG14K_CSG8K Functional Description Datasheet • PUBLIC DS000571 • v2-01 • 2023-Feb-10 113 │ 23 Internally, the supply regulators are not connected to the actual image sensor. Connections have to be made on PCB level (from a Vxx_H/L_OUT pin to a Vxx_H/L_IN pin). In addition, each supply regulator requires to be decoupled by a 10 µF and 100 nF capacitor. ams OSRAM recommends to use at least X7R-rated ceramic capacitors. To obtain an accurate bias reference in the sensor, an external bias resistor of 15.2 k Ω must be placed between BIAS_IDAC_RES and ground. It is advised to use a low tolerance (± 1%) and low temperature coefficient (50 ppm/°C or better). Next figure shows the positive and negative voltage regulator as well as the bias connections. Figure 15: On-Chip Regulators Connection Diagram After power-up of the sensor, the recommended register settings will set the correct supply levels for these regulators. Figure 15 gives an overview of the available supply regulators, the connection to the bias pin and the required voltage on that pin. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
