22

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

WELDING TECHNIQUE

•

Try to maintain the tip of the nozzle at an angle of approx. 45O and at a

constant distance of approx 5-7mm from the workpiece.

•

Try to maintain a constant speed of movement with the torch.

•

DO NOT weld in windy conditions or in an area where ventilation is a

problem, or where air flow fluctuates.

•

ALWAYS keep the wire and nozzle clean. NEVER use rusted wire.

•

Avoid sharp bends or kinks in the welding hose.

•

Whenever possible, clean out the wire liner with compressed air when

replacing the wire spool.

•

Periodically remove the dust using LOW PRESSURE compressed air within

the casing. Adequate heat dissipation is essential during the welders

operation.