Functional description

STB5701

30/35

Note:

The maximum time of the symbol is stored in this register. Any changes in the input data are

allowed only between symbol minimum time and symbol maximum time. The symbol time

counting is done by a clock (enable pulse) which ia output of pre-scaler. If a value 0x10 is

written into this register, the symbol max time is 16 pre-scaler clock periods.

Note:

The nominal time of the symbol in terms of pre-scaler ticks is stored in this register. This

value is used to register a new symbol when consecutive symbols with same logical value

are received. If a value 0x10 is written into this register, the symbol nominal time is 16 pre-

scaler clock periods.

Note:

The nominal time of the symbol is stored in this register.

Note:

The interrupt enable register value is stored in this register.

Table 21.

SCD_symbol_max_time register format

SCD_symbol_max_time

0x94

R/W

Bit

Bit field

Reset state

Function

15:0

Max_time

0x00

Maximum symbol time

31:16

Reserved

0x00

0x00

Table 22.

SCD_symbol_nom_time register format

SCD_symbol_nom_time

0x98

R/W

Bit

Bit field

Reset state

Function

15:0

Nom_time

0x00

Nominal symbol time

31:16

Reserved

0x00

0x00

Table 23.

SCD_prescaler register format

SCD_prescaler

0x9C

R/W

Bit

Bit field

Reset state

Function

15:0

prescaler

0x01

Pre scaler division value is stored in this register

31:16

Reserved

0x00

0x00

Table 24.

Interrupt_enable register format

Interrupt_enable

0xA0

R/W

Bit

Bit field

Reset state

Function

0

scd_detected

0

1 Enable interrupt

0 Disable interrupt

31:1

Reserved

0x00

0x00