| 전자부품 데이터시트 검색엔진 |
|
DP80390 데이터시트(PDF) 33 Page - Digital Core Design |
|
|
|||||||||||||||||||||||||||||
DP80390 데이터시트(HTML) 33 Page - Digital Core Design |
|
33 / 84 page ![]() DP80390 Instructions set details - 33 - All trademarks mentioned in this document http://www.DigitalCoreDesign.com are trademarks of their respective owners. http://www.dcd.pl Copyright 1999-2003 DCD – Digital Core Design. All Rights Reserved. 3.9. DA Instruction: DA A Function: Decimal adjust accumulator for addition Description: DA A adjusts the eight-bit value in the accumulator resulting from the earlier addition of two variables (each in packed BCD format), producing two four-bit digits. Any ADD or ADDC instruction may have been used to perform the addition. If accumulator bits 3-0 are greater than nine (xxxx1010-xxxx1111), or if the AC flag is one, six is added to the accumulator producing the proper BCD digit in the low- order nibble. This internal addition would set the carry flag if a carry-out of the low- order four-bit field propagated through all high-order bits, but it would not clear the carry flag otherwise. If the carry flag is now set, or if the four high-order bits now exceed nine (1010xxxx-1111xxxx), these high-order bits are incremented by six, producing the proper BCD digit in the high-order nibble. Again, this would set the carry flag if there was a carry-out of the high-order bits, but wouldn't clear the carry. The carry flag thus indicates if the sum of the original two BCD variables is greater than 100, allowing multiple precision decimal addition. OV is not affected. All of this occurs during the one instruction cycle. Essentially; this instruction performs the decimal conversion by adding 00 H , 06 H , 60 H , or 66 H to the accumulator, depending on initial accumulator and PSW conditions. Note: DA A cannot simply convert a hexadecimal number in the accumulator to BCD notation, nor does DA A apply to decimal subtraction. Operation: (PC) ← (PC) + 1 if [[(A3-0) > 9] ^ [(AC) = 1]] then (A3-0) ← (A3-0) + 6 next if [[(A7-4) > 9] ^ [(C) = 1]] then (A7-4) ← (A7-4) + 6 Bytes: 1 Cycles: 3 Encoding: 1 1 0 1 0 1 0 0 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |