C167CS-L datasheet(53/81 Pages) INFINEON

53 / 81 page

C167CS-4R

C167CS-L

Data Sheet

V2.2, 2001-08

Operating Conditions

The following operating conditions must not be exceeded in order to ensure correct

operation of the C167CS. All parameters specified in the following sections refer to these

operating conditions, unless otherwise noticed.

Table 9

Operating Condition Parameters

Parameter

Symbol

Limit Values

Unit Notes

min.

max.

Digital supply voltage

VDD

4.5

5.5

Active mode,

fCPUmax = 40 MHz

2.51)

1) Output voltages and output currents will be reduced when V

DD leaves the range defined for active mode.

5.5

PowerDown mode

Digital ground voltage

VSS

Reference voltage

Overload current

IOV

–

±5mA

Per pin2)3)

2) Overload conditions occur if the standard operating conditions are exceeded, i.e. the voltage on any pin

exceeds the specified range (i.e.

VOV > VDD +0.5 V or VOV < VSS - 0.5 V). The absolute sum of input overload

currents on all pins may not exceed 50 mA. The supply voltage must remain within the specified limits.

Proper operation is not guaranteed if overload conditions occur on functional pins line XTAL1, RD, WR, etc.

3) Not 100% tested, guaranteed by design and characterization.

Absolute sum of overload

currents

Σ|IOV|

–

External Load

Capacitance

–

Pin drivers in

fast edge mode4)

4) The timing is valid for pin drivers in high current or dynamic current mode. The reduced static output current in

dynamic current mode must be respected when designing the system.

Ambient temperature

070

°C

SAB-C167CS …

-40

°C

SAF-C167CS …

-40

125

°C

SAK-C167CS …

C167CS-L 데이터시트(PDF) 53 Page - Infineon Technologies AG

C167CS-L 데이터시트(HTML) 53 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

데이터시트 다운로드

링크 URL