C167CS-L datasheet(17/81 Pages) INFINEON

17 / 81 page

C167CS-4R

C167CS-L

Data Sheet

V2.2, 2001-08

Note: The following behaviour differences must be observed when the bidirectional reset

is active:

• Bit BDRSTEN in register SYSCON cannot be changed after EINIT and is cleared

automatically after a reset.

• The reset indication flags always indicate a long hardware reset.

• The PORT0 configuration is treated like on a hardware reset. Especially the bootstrap

loader may be activated when P0L.4 is low.

• Pin RSTIN may only be connected to external reset devices with an open drain output

driver.

• A short hardware reset is extended to the duration of the internal reset sequence.

VDD

17, 46,

56, 72,

82, 93,

109,

126,

136,

144

–

Digital Supply Voltage:

+5 V during normal operation and idle mode.

≥2.5 V during power down mode.

VSS

18, 45,

55, 71,

83, 94,

110,

127,

139,

143

–

Digital Ground.

1) The CAN interface lines are assigned to ports P4 and P8 under software control. Within the CAN module

several assignments can be selected.

Table 2

Pin Definitions and Functions (cont’d)

Symbol Pin

Num.

Input

Outp.

Function

C167CS-L 데이터시트(PDF) 17 Page - Infineon Technologies AG

C167CS-L 데이터시트(HTML) 17 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81

데이터시트 다운로드

링크 URL