R8C2K datasheet(114/471 Pages) RENESAS

114 / 471 page

R8C/2K Group, R8C/2L Group

12. Interrupts

Rev.1.10

Dec 21, 2007

Page 97 of 450

REJ09B0406-0110

12. Interrupts

12.1

Interrupt Overview

12.1.1

Types of Interrupts

Figure 12.1 shows the types of Interrupts.

Figure 12.1

Interrupts

• Maskable Interrupts:

The interrupt enable flag (I flag) enables or disables these interrupts. The

interrupt priority order can be changed based on the interrupt priority level.

• Non-Maskable Interrupts:

The interrupt enable flag (I flag) does not enable or disable these interrupts.

The interrupt priority order cannot be changed based on interrupt priority

level.

Interrupts

(non-maskable interrupts)

Hardware

Software

(non-maskable interrupts)

(maskable interrupts)

Special

Peripheral functions(1)

Undefined instruction (UND instruction)

Overflow (INTO instruction)

BRK instruction

INT instruction

Watchdog timer

Oscillation stop detection

Voltage monitor 1

Voltage monitor 2

Single step(2)

Address break(2)

Address match

NOTES:

1. Peripheral function interrupts in the MCU are used to generate peripheral interrupts.

2. Do not use this interrupt. This is for use with development tools only.

R8C2K 데이터시트(PDF) 114 Page - Renesas Technology Corp

R8C2K 데이터시트(HTML) 114 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL