M16CSLASH29 datasheet(179/499 Pages) RENESAS

179 / 499 page

13. Timer S

page 155

13.1.1 Base Timer Reset Register(G1BTRR)

The G1BTRR register provides the capability to reset the base timer when the base timer count value

matches the value stored in the G1BTRR register. The G1BTRR register is enabled by the RST4 bit

in the G1BCR0 register. This function is identical in operation to the G1PO0 base timer reset that is

enabled by the RST1 bit in the G1BCR0 reigster. If the free-running operation is not selected, the

channel 0 can be used for a waveform generation when the base timer is reset by the G1BTRR

Figure 13.15 Base Timer Reset operation by Base Timer Reset Register

Figure 13.16 Base Timer Reset operation by G1PO0 register

_______

Figure 13.17 Base Timer Reset operation by INT1

NOTE:

________

1. INT1 Base Timer reset does not generate a Base Timer interrupt. INT1 may generate an interrupt if enabled.

Base timer

G1BTRR register

(Base timer reset register)

Base timer interrupt

RST4

m - 2 m - 1

m + 1 000016

Base timer overflow request (1)

NOTE:

1. Following conditions are required to generate a base timer overflow request by resetting the base timer.

If the IT bit is set to 0: 07FFF16 ≤ m ≤ 0FFFE16

If the IT bit is set to 1: 07FFF16 ≤ m ≤ 0FFFE16 or 0BFFF16 ≤ m ≤ 0FFFE16

000116

Base timer

G1PO0

G1IR0

RST1

m - 2 m - 1

m + 1 000016

000116

RST2

Base timer

P83/INT1

m - 2 m - 1

m + 1 000016 000116

M16C/29 데이터시트(PDF) 179 Page - Renesas Technology Corp