M32CSLASH86 datasheet(330/505 Pages) RENESAS

330 / 505 page

Page 307

22. Intelligent I/O (Communication Function)

)

(

Table 22.25 HDLC Processing Mode Specifications (Continued)

Item

Specification

Interrupt Request(1)

During transmit data processing,

• One of the following conditions can be selected to set the GiTOR bit in the

interrupt request register to "1" (interrupt request) (see Figure 11.14).

_ When the IRS bit in the GiMR register is set to "0" (no data in the GiTB

ter (transmit start).

_ When the IRS bit is set to "1" (transmission completed) and data transfer from

the transmit register to the GiTO register is completed.

• When data, which is already converted to HDLC data, is transferred from the

receive register of the GiTO register to the transmit buffer, the GiTOR bit is set

to "1"

During received data processing,

• When data is transferred from the GiRI register to the GiRB register (reception

completed), the GiRIR bit is set to "1" (See Figure 11.14).

• When received data is transferred from the receive buffer of the GiRI register to

the receive register, the GiRIR bit is set to "1".

• When the GiTB register is compared to the GiCMPj register (j=0 to 3), the

SRTiR bit is set to "1".

NOTES:

1. See Figure 11.14 for details on the GiTOR bit, GiRIR bit and SRTiR bit.

Table 22.26 Clock Settings (Communication Unit 0)

Transfer Clock(1)

CCS Register

CCS0 Bit

CCS1 Bit

f2n(2)

NOTES:

1. The transfer clock for reception is generated when the RSHTE bit in the G0ERC register is set to "1"

(receive shift operation enabled).

2. The CNT3 to CNT0 bits in the TCSPR register select no division (

n=0) or divide-by-2n (n=1 to 15).

Table 22.27 Clock Settings (Communication Unit 1)

Transfer Clock(1)

CCS Register

CCS2 Bit

CCS3 Bit

fBT1

2x(

n+2)

f2n(3)

n: Setting value of the G1PO0 register, 000116 to FFFD16

NOTES:

1. The transfer clock for reception is generated when the RSHTE bit in the G1ERC register is set to "1"

(receive shift operation enabled).

2. The transfer clock is generated in single-phase waveform output mode of the channel 1.

3. The CNT3 to CNT0 bits in the TCSPR register select no division (

n=0) or divide-by-2n (n=1 to 15).

(2)

M32C/86 데이터시트(PDF) 330 Page - Renesas Technology Corp

M32C/86 데이터시트(HTML) 330 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL