| 전자부품 데이터시트 검색엔진 |
|
M68HC08 데이터시트(PDF) 69 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
M68HC08 데이터시트(HTML) 69 Page - Freescale Semiconductor, Inc |
|
69 / 188 page ![]() Internal Clock Generator Module (ICG) Functional Description MC68HC908RF2 — Rev. 4.0 Data Sheet MOTOROLA Internal Clock Generator Module (ICG) 69 6.3.2.4 Digital Loop Filter The digital loop filter (DLF) uses the outputs of the frequency comparator to adjust the internal clock (ICLK) clock period. The DLF generates the DCO divider control bits (DDIV[3:0]) and the DCO stage control bits (DSTG[7:0]), which are fed to the DCO. The DLF first concatenates the DDIV and DSTG registers (DDIV[3:0]:DSTG[7:0]) and then adds or subtracts a value dependent on the relative error in the low-frequency base clock’s period, as shown in Table 6-1. In some extreme error conditions, such as operating at a VDD level which is out of specification, the DLF may attempt to use a value above the maximum ($9FF) or below the minimum ($000). In both cases, the value for DDIV will be between $A and $F. In this range, the DDIV value will be interpreted the same as $9 (the slowest condition). Recovering from this condition requires subtracting (increasing frequency) in the normal fashion until the value is again below $9FF (if the desired value is $9xx, the value may settle at $Axx through $Fxx, an acceptable operating condition). If the error is less than ±5 percent, the internal clock generator’s filter stable indicator (FICGS) is set, indicating relative frequency accuracy to the clock monitor. Table 6-1. Correction Sizes from DLF to DCO Frequency Error of IBASE Compared to fNOM DDVI[3:0]:DSTG[7:0] Correction Current to New DDIV[3:0]:DSTG[7:0] Relative Correction in DCO IBASE < 0.85 fNOM –32 (–$020) Min $xFF to $xDF –2/31 –6.45% Max $x20 to $x00 –2/19 –10.5% 0.85 fNOM < IBASE IBASE < 0.95 fNOM –8 (–$008) Min $xFF to $xF7 –0.5/31 –1.61% Max $x08 to $x00 –0.5/17.5 –2.86% 0.95 fNOM < IBASE IBASE < fNOM –1 (–$001) Min $xFF to $xFE –0.0625/31 –0.202% Max $x01 to $x00 –0.0625/17.0625 –0.366% fNOM < IBASE IBASE < 1.05 fNOM +1 (+$001) Min $xFE to $xFF +0.0625/30.9375 +0.202% Max $x00 to $x01 +0.0625/17 +0.368% 1.05 fNOM < IBASE IBASE < 1.15 fNOM +8 (+$008) Min $xF7 to $xFF +0.5/30.5 +1.64% Max $x00 to $x08 +0.5/17 +2.94% 1.15 fNOM < IBASE +32 (+$020) Min $xDF to $xFF +2/29 +6.90% Max $x00 to $x20 +2/17 +11.8% x: Maximum error is independent of value in DDIV[3:0]. DDIV increments or decrements when an addition to DSTG[7:0] carries or borrows. Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |