| 전자부품 데이터시트 검색엔진 |
|
HC210 데이터시트(PDF) 49 Page - Altera Corporation |
|
|
|||||||||||||||||||||||||||||
HC210 데이터시트(HTML) 49 Page - Altera Corporation |
|
49 / 228 page ![]() Altera Corporation 4–7 September 2008 I/O Standard Specifications Figure 4–1 and Figure 4–2 show receiver input and transmitter waveforms, respectively, for all differential I/O LVPECL and HyperTransport technology. Figure 4–1. Receiver Input Waveforms for Differential I/O Standards VOL Low-level output voltage IOL = 2 mA (2), (3) — 0.25 × VCCIO V Notes to Table 4–9: (1) HardCopy II devices VCCIO voltage-level support of 1.5 ± -5% is narrower than defined in the normal range of the EIA/JEDEC Standard. (2) Drive strength is programmable according to values in Tables 2–10, 2–12, and 2–14. (3) Drive strength varies based on pin location. Refer to the Description, Architecture, and Features chapter in the HardCopy II Device Family Data Sheet section in volume 1 of the HardCopy Series Handbook for more information. Table 4–9. 1.5-V I/O Specifications (Part 2 of 2) Symbol Parameter Conditions Minimum Maximum Unit Single-Ended Waveform Differential Waveform (Mathematical Function of Positive & Negative Channel) Positive Channel (p) = VIH Negative Channel (n) = VIL Ground VID VID VID p − n = 0 V VCM VID (Peak-to-peak) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |