MPC2F35L datasheet(20/46 Pages) MEGAWIN

20 / 46 page

MPC2F35_USB Data Sheet

MEGAWIN

FPCON: Function Power Control Register

Read/Write

Address: 12H

Default: XX0X_xX00

System Reset or USB Reset

Bit

Number

Bit

Mnemonic

Function

Reserved:

Write zero to this bit.

Reserved:

Write zero to this bit.

FRWU

Function Remote Wake-up Trigger:

This bit is used by the function to initiate a remote wake-up on the USB bus

when uC is wake-up by the external trigger.

Reserved:

Write zero to this bit.

URST

USB Reset Flag:

Set by hardware when the function detects the USB bus reset. If this bit is

set, and then the chip will generate the interrupt. Should be cleared by

firmware when serving the USB reset interrupt.

Reserved:

Write zero to this bit.

FRSM

Function Resume Flag:

Set by hardware when the function detects the resume state on the USB

bus. If this bit is set, and then the chip will generate the interrupt. Cleared

by firmware when servicing the function resume interrupt.

FSUS

Function Suspend Flag:

Set by hardware when the function detects the suspend state on the USB

bus. If this bit is set, and then the chip will generate the interrupt. During the

function suspend ISR, firmware should clear this bit before enter the

suspend mode.

MPC2F35L 데이터시트(PDF) 20 Page - Megawin Technology Co., Ltd