 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
MC34708 데이터시트(PDF) 69 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MC34708 데이터시트(HTML) 69 Page - Freescale Semiconductor, Inc |
|
|
69 / 159 page  Analog Integrated Circuit Device Data 69 Freescale Semiconductor MC34708 Functional Block Description 7.5.6.6 VREFDDR VREFDDR is an internal PMOS half supply Voltage Follower. The output voltage is at one half the input voltage. It’s typical application is as the VREF for DDR memories. A filtered resistor divider is utilized to create a low frequency pole. This divider then utilizes a voltage follower to drive the load. tON-VPLL Turn-on Time • Enable to 90% of end value VIN = VINMIN, VINMAX IL = 0 - - 120 µs tOFF-VPLL Turn-off Time • Disable to 10% of initial value VIN = VINMIN, VINMAX, IL = 0 0.05 - 10 ms VPLLOS- START Start-up Overshoot •VIN = VINMIN, VINMAX IL = 0 - 1.0 2.0 % VPLL-LO TRANSIENT Transient Load Response •VIN = VINMIN, VINMAX - 50 70 mV VPLL-LI TRANSIENT Transient Line Response •IL = 75% of ILMAX - 5.0 8.0 mV Table 58. VREFDDR Electrical Specification Characteristics noted under conditions BP = 3.6 V, VBUS = 5.0 V, -40 C TA 85 C, unless otherwise noted. Typical values at BP = 3.6 V and TA = 25 °C under nominal conditions, unless otherwise noted. Symbol Characteristic Min Typ Max Unit Notes GENERAL VREFFDDRIN Operating Input Voltage Range VINMIN to VINMAX 1.2 - 1.8 V IREFDDR Operating Current Load Range ILMIN to ILMAX 0.0 - 10 mA VREFDDR ACTIVE MODE – DC VREFDDR Output Voltage VOUT •VINMIN < VIN < VINMAX ILMIN < IL < ILMAX 0.6 VIN/2 0.9 V VREFDDRTOL Output Voltage tolerance •VINMIN < VIN < VINMAX IL = 1.0 mA -6.5 - 6.5 % (58) VREFDDR LOPP Load Regulation •1.0 mA < IL < ILMAX For any VINMIN < VIN < VINMAX - 5.0 - mV/mA IREFDDRQ Quiescent Current •VINMIN < VIN < VINMAX IL = 0 - 8.0 - µA VREFDDR ACTIVE MODE – AC tON-VREFDDR Turn-on Time • Enable to 90% of end value VIN = VINMIN, VINMAX IL = 0 - - 100 µs tOFF- VREFDDR Turn-off Time • Disable to 10% of initial value VIN = VINMIN, VINMAX, IL = 0 0.05 - 10 ms VREFDDROS Start-up Overshoot •VIN = VINMIN, VINMAX IL = 0 - 1.0 2.0 % Table 57. VPLL Electrical Specification Characteristics noted under conditions BP = 3.6 V, VBUS = 5.0 V,-40 C TA 85 C, unless otherwise noted. Typical values at BP = 3.6 V and TA = 25 °C under nominal conditions, unless otherwise noted. Symbol Characteristic Min Typ Max Unit Notes |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
