SN8P1602A datasheet(40/76 Pages) SONIX

40 / 76 page

SN8P1602B

8-Bit Micro-Controller

SONiX TECHNOLOGY CO., LTD

Page 40

Version 1.1

EXTERNAL HIGH-SPEED OSCILLATOR

SN8P1602B can be operated in four different oscillator modes. There are external RC oscillator modes, high

crystal/resonator mode (12M code option), standard crystal/resonator mode (4M code option) and low crystal mode

(32K code option). For different application, the users can select one of suitable oscillator mode by programming code

option to generate system high-speed clock source after reset.

Example: Stop external high-speed oscillator

B0BSET

FSTPHX

; To stop external high-speed oscillator only.

Example: When entering the Power Down mode, both external high-speed oscillator and internal

low-speed oscillator will be stopped.

B0BSET

FCPUM0

; To stop external high-speed oscillator and internal low-speed

; oscillator called power down mode (sleep mode).

OSCILLATOR MODE CODE OPTION

SN8P1602B has four oscillator modes for different applications. These modes are 4M, 12M, 32K and RC. The main

purpose is to support different oscillator types and frequencies. MCU needs more current when operating at

High-speed mode than the low-speed mode. For crystals, there are three steps to select. If the oscillator is RC type, to

select “RC” and the system will divide the frequency by 2 automatically. User can select oscillator mode from code

option table before compiling. Following is the code option table.

Code Option

Oscillator Mode

Remark

RC mode

Output the Fcpu square wave from Xout pin.

32K

32768Hz

12M

12MHz ~ 16MHz

3.58MHz

OSCILLATOR DEVIDE BY 2 CODE OPTION

SN8P1602B has a code option to divide external clock by 2,called “High_Clk / 2”. If “High_Clk / 2” is enabled, the

external clock frequency is divided by 8 for the Fcpu. Fcpu is equal to Fosc/8. If “High_Clk / 2” is disabled, the Fcpu is

equal to Fosc/4.

Note: In RC mode, “High_Clk / 2” is always enabled.

OSCILLATOR SAFE GUARD CODE OPTION

SN8P1602B builds in an oscillator safe guard (OSG) to make oscillator more stable. It is a low-pass filter circuit and

stops high frequency noise into system from external oscillator circuit. This function makes system to work better under

AC noisy conditions.

SN8P1602A 데이터시트(PDF) 40 Page - SONiX Technology Company

SN8P1602A 데이터시트(HTML) 40 Page - SONiX Technology Company

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

데이터시트 다운로드

링크 URL