ST10F276E datasheet(198/235 Pages) STMICROELECTRONICS

부품명	ST10F276E

상세설명	16-bit MCU with MAC unit 832 Kbyte Flash memory and 68 Kbyte RAM

PDF	235 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

198 / 235 page

Electrical characteristics

ST10F276E

198/235

Doc ID 12303 Rev 3

23.8.2

Definition of internal timing

The internal operation of the ST10F276E is controlled by the internal CPU clock fCPU. Both

edges of the CPU clock can trigger internal (for example pipeline) or external (for example

bus cycles) operations.

The specification of the external timing (AC Characteristics) therefore depends on the time

between two consecutive edges of the CPU clock, called “TCL”.

The CPU clock signal can be generated by different mechanisms. The duration of TCL and

its variation (and also the derived external timing) depends on the mechanism used to

generate fCPU.

This influence must be regarded when calculating the timings for the ST10F276E.

The example for PLL operation shown in Figure 52 refers to a PLL factor of 4.

The mechanism used to generate the CPU clock is selected during reset by the logic levels

on pins P0.15-13 (P0H.7-5).

Figure 52.

Generation mechanisms for the CPU clock

ST10F276E 데이터시트(PDF) 198 Page - STMicroelectronics