ST10F280_12 datasheet(85/239 Pages) STMICROELECTRONICS

전자부품 데이터시트 검색엔진

ALLDATASHEET.CO.KR

ST10F280 데이터시트(PDF) 85 Page - STMicroelectronics

부품명	ST10F280

상세설명	16-bit MCU with MAC unit, 512 Kbyte Flash memory and 18 Kbyte RAM

PDF	239 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

85 / 239 page

ST10F280

PWM module

Doc ID 8673 Rev. 3

85/239

Figure 21.

Operation and output waveform in mode 1

Burst mode

Burst mode is selected by setting bit PB01 in register XPWMCON1 to ‘1’. This mode

combines the signals from XPWM channels 0 and 1 onto the port pin of channel 0. The

output of channel 0 is replaced with the logical AND of channels 0 and 1. The output of

channel 1 can still be used at its associated output pin (if enabled).

Each of the two channels can either operate in mode 0 or 1.

Note:

It is guaranteed by design, that no spurious spikes will occur at the output pin of channel 0 in

this mode. The output of the AND gate will be transferred to the output pin synchronously to

internal clocks.

XORing of the PWM signal and the port output latch value is done after the ANDing of

channel 0 and 1.

ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ]
Alldatasheet는? \| 광고문의 \| 운영자에게 연락하기 \| 개인정보취급방침 \| 링크 투 데이터시트 \| 링크교환 \| 제조사별 검색 All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ]

Family Site : ic2ic.com | icmetro.com