 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
WM8904ECS/R 데이터시트(PDF) 19 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8904ECS/R 데이터시트(HTML) 19 Page - Wolfson Microelectronics plc |
|
|
19 / 188 page  Pre-Production WM8904 w PP, Rev 3.3, September 2012 19 OTHER PARAMETERS VMID Reference PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Midrail Reference Voltage (VMIDC pin) -3% AVDD/2 +3% V Charge up time (from fully discharged to 10% below VMID) External capacitor 4.7 F 890 μs Microphone Bias (for analogue electret condenser microphones) Additional test conditions: MICBIAS_ENA=1, all parameters measured at the MICBIAS pin PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Bias Voltage. Note: 7/6 and 9/10 are available only if MICVDD > AVDD. Note: 3/2 and 4/3 are available only if MICVDD ≥ 2.5V. VMICBIAS MICVDD = 2.5V 3mA load current, MICBIAS_SEL = 1xx -10% 3/2 x AVDD +10% V MICBIAS_SEL = 011 -10% 4/3 x AVDD +10% MICBIAS_SEL = 010 -10% 7/6 x AVDD +10% MICBIAS_SEL = 001 -10% 10/9 x AVDD +10% MICBIAS_SEL = 000 -10% 9/10 ×AVDD +10% Drop out voltage between MICVDD and MICBIAS 200 mV Maximum source current IMICBIAS 4 mA Noise spectral density At 1kHz 19 nV/√Hz Power Supply Rejection Ratio MICVDD to MICBIAS PSRR 1kHz, 100mV pk-pk MICVDD = 1.71 V 67 dB 20kHz, 100mV pk-pk MICVDD = 1.71 V 76 1kHz, 100mV pk-pk MICVDD = 2.5 V 88 20kHz, 100mV pk-pk MICVDD = 2.5 V 84 1kHz, 100mV pk-pk MICVDD = 3.6 V 61 20kHz, 100mV pk-pk MICVDD = 3.6 V 70 Power Supply Rejection Ratio MICVDD and AVDD to MICBIAS PSRR 1kHz, 100mV pk-pk AVDD = MICVDD = 1.8 V 54 dB 20kHz, 100mV pk-pk AVDD = MICVDD = 1.8 V 79 MICBIAS Current Detect Function (See Note 1) Current Detect Threshold (Microphone insertion) MICDET_THR = 00 80 A Current Detect Threshold (Microphone removal) 60 Delay Time for Current Detect Interrupt tDET 3.2 ms MICBIAS Short Circuit (Hook Switch) Detect Function (See Note 1) Short Circuit Detect Threshold (Button press) MICSHORT_THR = 00 600 A Short Circuit Detect Threshold (Button release) 400 Minimum Delay Time for Short Circuit Detect Interrupt tSHORT 47 ms Note 1 : If AVDD 1.8, current threshold values should be multiplied by (AVDD/1.8) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
