STM32F407IE datasheet(176/180 Pages) STMICROELECTRONICS

176 / 180 page

Revision history

STM32F405xx, STM32F407xx

176/180

Doc ID 022152 Rev 3

24-Jan-2012

(continued)

Added V12 in Table 18: Embedded reset and power control block

characteristics.

Updated Table 19: Typical and maximum current consumption in Run

mode, code with data processing running from Flash memory (ART

accelerator disabled) and Table 20: Typical and maximum current

consumption in Run mode, code with data processing running from

Flash memory (ART accelerator enabled) or RAM. Added Figure ,

Figure 23, Figure 24, and Figure 25.

Updated Table 21: Typical and maximum current consumption in Sleep

mode and removed Note 1.

Updated Table 22: Typical and maximum current consumptions in Stop

mode and Table 23: Typical and maximum current consumptions in

Standby mode, Table 24: Typical and maximum current consumptions

in VBAT mode, and Table 25: Switching output I/O current consumption.

Section : On-chip peripheral current consumption: modified conditions,

and updated Table 26: Peripheral current consumption and Note 2.

Changed fHSE_ext to 50 MHz and tr(HSE)/tf(HSE) maximum value in

Table 28: High-speed external user clock characteristics.

Added Cin(LSE) in Table 29: Low-speed external user clock

characteristics.

Updated maximum PLL input clock frequency, removed related note,

and deleted jitter for MCO for RMII Ethernet typical value in Table 34:

Main PLL characteristics. Updated maximum PLLI2S input clock

frequency and removed related note in Table 35: PLLI2S (audio PLL)

characteristics.

Updated Section : Flash memory to specify that the devices are

shipped to customers with the Flash memory erased. Updated

Table 37: Flash memory characteristics, and added tME in Table 38:

Flash memory programming.

Updated Table 41: EMS characteristics, and Table 42: EMI

characteristics.

Updated Table 55: I2S characteristics

Updated Figure 44: ULPI timing diagram and Table 62: ULPI timing.

Added tCOUNTER and tMAX_COUNT in Table 50: Characteristics of TIMx

connected to the APB1 domain and Table 51: Characteristics of TIMx

connected to the APB2 domain. Updated Table 65: Dynamics

characteristics: Ethernet MAC signals for RMII.

Removed USB-IF certification in Section : USB OTG FS

characteristics.

Table 97.

Document revision history (continued)

Date

Revision

Changes

STM32F407IE 데이터시트(PDF) 176 Page - STMicroelectronics

STM32F407IE 데이터시트(HTML) 176 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL