KTPFPGMEVMEUG datasheet(15/48 Pages) FREESCALE

부품명	KTPFPGMEVMEUG

상세설명	KITPFPGMEVME Programmer for PF Series Devices

PDF	48 Pages

Scroll/Zoom	100%

제조업체	FREESCALE [Freescale Semiconductor, Inc]

홈페이지	http://www.freescale.com

Logo

15 / 48 page

KTPFPGMEVMEUG, Rev. 2.0

Freescale Semiconductor

Software and Drivers Installation

6. To check if the USB device driver was installed correctly, go to Start > Setting > Control Panels > System >

Device Driver. You should see "PF-Programmer" under "NI-VISA USB Devices".

Figure 14. Microsoft Windows Device Manager

5.2

Connect the Target Board to KITPFPGMEVME Programmer

Connect the KITPFPGMEVME programmer to your target board using the supplied 8-conductor flat ribbon cable.

The flat cable is keyed so that the correct header pins are connected on the programmer.

WARNING: Verify that the brown wire on the other end of the flat cable is connected to pin 1 on your target board

header. Freescale recommends a shrouded pin header (TST-104-01-G-D) to be placed on the target board to

prevent the cable from being incorrectly inserted into the header and damaging your board.

KTPFPGMEVMEUG 데이터시트(PDF) 15 Page - Freescale Semiconductor, Inc