LCMXO2-640ZE-1TG100C datasheet(20/106 Pages) LATTICE

20 / 106 page

2-16

Architecture

MachXO2 Family Data Sheet

Figure 2-12. MachXO2 Input Register Block Diagram (PIO on Left, Top and Bottom Edges)

Right Edge

The input register block on the right edge is a superset of the same block on the top, bottom, and left edges. In

addition to the modes described above, the input register block on the right edge also supports DDR memory

mode.

In DDR memory mode, two registers are used to sample the data on the positive and negative edges of the modi-

fied DQS (DQSR90) in the DDR Memory mode creating two data streams. Before entering the core, these two data

streams are synchronized to the system clock to generate two data streams.

The signal DDRCLKPOL controls the polarity of the clock used in the synchronization registers. It ensures ade-

quate timing when data is transferred to the system clock domain from the DQS domain. The DQSR90 and

DDRCLKPOL signals are generated in the DQS read-write block.

Figure 2-13. MachXO2 Input Register Block Diagram (PIO on Right Edge)

Output Register Block

The output register block registers signals from the core of the device before they are passed to the sysIO buffers.

Left, Top, Bottom Edges

In SDR mode, D0 feeds one of the flip-flops that then feeds the output. The flip-flop can be configured as a D-type

SCLK

INCK

INDD

Programmable

Delay Cell

D/L Q

INDD

DQSR90

SCLK

DDRCLKPOL

Programmable

Delay Cell

D/L Q

INCK

LCMXO2-640ZE-1TG100C 데이터시트(PDF) 20 Page - Lattice Semiconductor