MPC8241EC datasheet(5/58 Pages) FREESCALE

5 / 58 page

MPC8241 Integrated Processor Hardware Specifications, Rev. 10

Freescale Semiconductor

General Parameters

—I2C controller with full master/slave support that accepts broadcast messages

— Programmable interrupt controller (PIC)

– Five hardware interrupts (IRQs) or 16 serial interrupts

– Four programmable timers with cascade

— Two (dual) universal asynchronous receiver/transmitters (UARTs)

— Integrated PCI bus and SDRAM clock generation

— Programmable PCI bus and memory interface output drivers

•

System level performance monitor facility

•

Debug features

— Memory attribute and PCI attribute signals

— Debug address signals

—MIV signal—marks valid address and data bus cycles on the memory bus

— Programmable input and output signals with watchpoint capability

— Error injection/capture on data path

— IEEE Std. 1149.1 (JTAG)/test interface

General Parameters

The following list summarizes the general parameters of the MPC8241:

Technology

0.25 µm CMOS, five-layer metal

Die size

49.2 mm

Transistor count

4.5 million

Logic design

Fully static

Packages

Surface-mount 357 (thick substrate and thick mold cap)

plastic ball grid array (PBGA)

Core power supply

1.8 V ± 100 mV DC (nominal; see Table 2 for details

and recommended operating conditions)

I/O power supply

3.0 to 3.6 V DC

MPC8241EC 데이터시트(PDF) 5 Page - Freescale Semiconductor, Inc