E5CN-R2ML-500 datasheet(25/72 Pages) OMRON

25 / 72 page

E5AN/E5EN

Characteristics

✽1. The indication accuracy of K thermocouples in the −200 to 1300°C range, T and N thermocouples at a temperature of −100°C max., and U

and L thermocouples at any temperatures is

±2°C ±1 digit max. The indication accuracy of the B thermocouple at a temperature of 400°C max.

is not specified. The indication accuracy of B thermocouples in the 400 to 800

°C range is ±3°C max. The indication accuracy of the R and S

thermocouples at a temperature of 200

°C max. is ±3°C ±1 digit max. The indication accuracy of W thermocouples is ±0.3 of PV or ±3°C,

whichever is greater,

±1 digit max. The indication accuracy of PL II thermocouples is ±0.3 of PV or ±2°C, whichever is greater, ±1digit max.

✽2. Ambient temperature: −10°C to 23°C to 55°, Voltage range: −15% to 10% of rated voltage

✽3. K thermocouple at −100°C max.: ±10°C max.

✽4. “EU” stands for Engineering Unit and is used as the unit after scaling. For a temperature sensor, the EU is °C or °F.

✽5. When robust tuning (RT) is ON, the differential time is 0.0 to 999.9 (in units of 0.1 s).

✽6. External communications (RS-232C or RS-485) and cable communications for the Setup Tool can be used at the same time.

Indication accuracy

Thermocouple: (

±0.3% of indicated value or ±1°C, whichever is greater) ±1 digit max. ✽1

Platinum resistance thermometer: (

±0.2% of indicated value or ±0.8°C, whichever is greater) ±1 digit max.

Analog input:

±0.2% FS ±1 digit max.

CT input:

±5% FS ±1 digit max.

Transfer output accuracy

±0.3% FS max.

Influence of temperature

✽2

Thermocouple input (R, S, B, W, PL II): (

±1% of PV or ±10°C, whichever is greater) ±1 digit max.

Other thermocouple input: (

±1% of PV or ±4°C, whichever is greater) ±1 digit max. ✽3

Platinum resistance thermometer: (

±1% of PV or ±2°C, whichever is greater) ±1 digit max.

Analog input: (

±1%FS) ±1 digit max.

Influence of voltage

✽2

Input sampling period

250 ms

Hysteresis

Models with thermocouple/platinum resistance thermometer input (universal input): 0.1 to 999.9 EU (in units of 0.1

EU)

✽4

Models with analog input: 0.01 to 99.99% FS (in units of 0.01% FS)

Proportional band (P)

Models with thermocouple/platinum resistance thermometer input (universal input): 0.1 to 999.9 EU (in units of 0.1

EU)

✽4

Models with analog input: 0.1 to 999.9% FS (in units of 0.1% FS)

Integral time (I)

0 to 3999 s (in units of 1 s)

Derivative time (D)

0 to 3999 s (in units of 1 s)

✽5

Control period

0.5, 1 to 99 s (in units of 1 s)

Manual reset value

0.0 to 100.0% (in units of 0.1%)

Alarm setting range

−1999 to 9999 (decimal point position depends on input type)

Affect of signal source

resistance

Thermocouple: 0.1

°C/Ω max. (100 Ω max.)

Platinum resistance thermometer: 0.1

°C/Ω max. (10 Ω max.)

Insulation resistance

20 M

Ω min. (at 500 VDC)

Dielectric strength

2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)

Vibration

resistance

Malfunction

10 to 55 Hz, 20 m/s2 for 10 min each in X, Y, and Z directions

Destruction

10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions

Shock

resistance

Malfunction

100 m/s2, 3 times each in X, Y, and Z directions

Destruction

300 m/s2, 3 times each in X, Y, and Z directions

Weight

E5AN

Controller: Approx. 310 g, Mounting Bracket: Approx. 100 g

E5EN

Controller: Approx. 260 g, Mounting Bracket: Approx. 100 g

Degree of protection

Front panel: IP66, Rear case: IP20, Terminals: IP00

Memory protection

Non-volatile memory (number of writes: 1,000,000 times)

Setup Tool

CX-Thermo version 4.0 or higher

Setup Tool port

Provided on the bottom of the E5AN and E5EN.

An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5AN and E5EN

✽6

Standards

Approved

standards

UL 61010-1, CSA C22.2 No. 1010-1

Conformed

standards

EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II

EMC

EMI:

EN 61326

Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A

Noise Terminal Voltage:

EN 55011 Group 1, class A

EMS:

EN 61326

ESD Immunity:

EN 61000-4-2

Electromagnetic Field Immunity:

EN 61000-4-3

Burst Noise Immunity:

EN 61000-4-4

Conducted Disturbance Immunity:

EN 61000-4-6

Surge Immunity:

EN 61000-4-5

Power Frequency Magnetic Field Immunity:

EN 61000-4-8

Voltage Dip/Interrupting Immunity:

EN 61000-4-11

E5CN-R2ML-500 데이터시트(PDF) 25 Page - Omron Electronics LLC

E5CN-R2ML-500 데이터시트(HTML) 25 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

데이터시트 다운로드

링크 URL