EMC1413 datasheet(52/52 Pages) SMSC

52 / 52 page

Multiple Channel 1°C Temperature Sensors with Beta Compensation

Datasheet

Revision 1.41 (02-23-12)

SMSC EMC1413 / EMC1414

DATASHEET

Rev. 1.35 (05-06-09)

Pin Table

Identified 5V tolerant pins. Added the following

application note below table: “For the 5V tolerant

pins that have a pull-up resistor (SMCLK,

SMDATA, THERM, ALERT), the voltage difference

between VDD and the pull-up voltage must never

exceed 3.6V.”

Table 4.1, "Absolute

Maximum Ratings"

Updated voltage limits for 5V tolerant pins with

pull-up resistors.

Added the following note below table: “For the 5V

tolerant pins that have a pull-up resistor (SMCLK,

SMDATA, THERM, ALERT), the pull-up voltage

must not exceed 3.6V when the device is

unpowered.”

Table 4.2, "Electrical

Specifications"

Added leakage current

Ordering Information and

Table 2.1, “Part Selection”

Added EMC1414-3 and EMC1413-3

Table 9.2, "10-Pin DFN

Package Drawing"

Updated figures for package

Rev. 1.34 (12-02-08)

Initial document creation

Table 10.1 Customer Revision History (continued)

REVISION LEVEL & DATE

SECTION/FIGURE/ENTRY

CORRECTION

EMC1413 데이터시트(PDF) 52 Page - SMSC Corporation