PIC16F1503 datasheet(93/340 Pages) MICROCHIP

93 / 340 page

 2011 Microchip Technology Inc.

Preliminary

DS41607A-page 93

PIC16(L)F1503

10.3

Modifying Flash Program Memory

When modifying existing data in a program memory

row, and data within that row must be preserved, it must

first be read and saved in a RAM image. Program

memory is modified using the following steps:

Load the starting address of the row to be

modified.

Read the existing data from the row into a RAM

image.

Modify the RAM image to contain the new data

to be written into program memory.

Load the starting address of the row to be

rewritten.

Erase the program memory row.

Load the write latches with data from the RAM

image.

Initiate a programming operation.

FIGURE 10-7:

FLASH PROGRAM

MEMORY MODIFY

FLOWCHART

Start

Modify Operation

Read Operation

(Figure x.x)

Erase Operation

(Figure x.x)

Modify Image

The words to be modified are

changed in the RAM image

End

Modify Operation

Write Operation

use RAM image

(Figure x.x)

An image of the entire row read

must be stored in RAM

Figure 10-2

Figure 10-4

Figure 10-5

PIC16F1503 데이터시트(PDF) 93 Page - Microchip Technology

PIC16F1503 데이터시트(HTML) 93 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL