| 전자부품 데이터시트 검색엔진 |
|
AGLP030 데이터시트(PDF) 74 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
AGLP030 데이터시트(HTML) 74 Page - Microsemi Corporation |
|
74 / 134 page ![]() IGLOO PLUS DC and Switching Characteristics 2-60 Revision 16 Table 2-88 • AGLP060 Global Resource Commercial-Case Conditions: TJ = 70°C, VCC = 1.14 V Parameter Description Std. Units Min.1 Max.2 tRCKL Input Low Delay for Global Clock 2.02 2.43 ns tRCKH Input High Delay for Global Clock 2.09 2.65 ns tRCKMPWH Minimum Pulse Width High for Global Clock 1.40 ns tRCKMPWL Minimum Pulse Width Low for Global Clock 1.65 ns tRCKSW Maximum Skew for Global Clock 0.56 ns Notes: 1. Value reflects minimum load. The delay is measured from the CCC output to the clock pin of a sequential element, located in a lightly loaded row (single element is connected to the global net). 2. Value reflects maximum load. The delay is measured on the clock pin of the farthest sequential element, located in a fully loaded row (all available flip-flops are connected to the global net in the row). 3. For specific junction temperature and voltage supply levels, refer to Table 2-7 on page 2-7 for derating values. Table 2-89 • AGLP125 Global Resource Commercial-Case Conditions: TJ = 70°C, VCC = 1.14 V Parameter Description Std. Units Min.1 Max.2 tRCKL Input Low Delay for Global Clock 2.08 2.54 ns tRCKH Input High Delay for Global Clock 2.15 2.77 ns tRCKMPWH Minimum Pulse Width High for Global Clock 1.40 ns tRCKMPWL Minimum Pulse Width Low for Global Clock 1.65 ns tRCKSW Maximum Skew for Global Clock 0.62 ns Notes: 1. Value reflects minimum load. The delay is measured from the CCC output to the clock pin of a sequential element, located in a lightly loaded row (single element is connected to the global net). 2. Value reflects maximum load. The delay is measured on the clock pin of the farthest sequential element, located in a fully loaded row (all available flip-flops are connected to the global net in the row). 3. For specific junction temperature and voltage supply levels, refer to Table 2-7 on page 2-7 for derating values. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |