Electrical specifications

L4995

8/35

Doc ID 13103 Rev 14

2

Electrical specifications

2.1

Absolute maximum ratings

Stressing the device above the rating listed in the “Absolute maximum ratings” table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the Operating sections of

this specification is not implied. Exposure to Absolute Maximum Rating conditions for

extended periods may affect device reliability. Refer also to the STMicroelectronics SURE

Program and other relevant quality documents.

Table 3.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

DC supply voltage

- 0.3 to 40

V

Input current

Internally limited

(1)

1.

Using the typical application schematic with Cout= 10 µF and Iout=0 A, when the regulator is switched-on,

an overshoot exceeding 6 V could occur.This behavior does not impact the reliability of the regulator.

DC output voltage

- 0.3 to 6

V

DC output current

Internally limited

Watchdog input voltage

V

V

Internally limited

V

Watchdog delay voltage

V

Enable input

V

Junction temperature

- 40 to 150

C

ESD voltage level (HBM-MIL STD 883C)

± 2

kV

ESD voltage level (CDM AEC-Q100-011)

750

V