For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/)

i_smd_NR_NS_prec_e-E02R01

6. Handling

Precautions

◆Handling

1. Keep the product away from all magnets and magnetic objects.

◆Breakaway PC boards (splitting along perforations)

1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.

2. Board separation should not be done manually, but by using the appropriate devices.

◆Mechanical considerations

1. Please do not give the product any excessive mechanical shocks.

2. Please do not add any shock and power to a product in transportation.

◆Pick-up pressure

1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.

◆Packing

1. Please avoid accumulation of a packing box as much as possible.

Technical

considerations

◆Handling

1. There is a case that a characteristic varies with magnetic influence.

◆Breakaway PC boards (splitting along perforations)

1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs.

◆Mechanical considerations

1. There is a case to be damaged by a mechanical shock.

2. There is a case to be broken by the handling in transportation.

◆Pick-up pressure

1. Damage and a characteristic can vary with an excessive shock or stress.

◆Packing

1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.

7. Storage conditions

Precautions

◆Storage

1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the

storage area should be controlled.

・ Recommended conditions

Ambient temperature : －5～40℃

Humidity : Below 70% RH

・ The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may

decrease as time passes.

For this reason, product should be used within 6 months from the time of delivery.

In case of storage over 6 months, solderability shall be checked before actual usage.

Technical

considerations

◆Storage

1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes

and deterioration of taping/packaging materials may take place.