28F004SC datasheet(30/42 Pages) INTEL

30 / 42 page

BYTE-WIDE SmartVoltage FlashFile™ MEMORY FAMILY

PRELIMINARY

6.0

ELECTRICAL SPECIFICATIONS

6.1

Absolute Maximum Ratings*

Temperature under Bias ................ –10°C to +80°C

Storage Temperature....................–65°C to +125°C

Voltage on Any Pin

(except VPP, and RP#) ......... –2.0 V to +7.0 V(1)

VPP Voltage ........................... –2.0 V to +14.0 V(1,2)

RP# Voltage ........................ –2.0 V to +14.0 V(1,2,4)

Output Short Circuit Current ....................100 mA(3)

NOTICE: This datasheet contains information on new

products in production. Do not finalize a design with this

information. Revised information will be published when

the product is available. Verify with your local Intel Sales

office that you have the latest datasheet before finalizing a

design.

*WARNING: Stressing the device beyond the “Absolute

Maximum Ratings” may cause permanent damage. These

are stress ratings only. Operation beyond the “Operating

Conditions” is not recommended and extended exposure

beyond the “Operating Conditions” may affect device

reliability.

NOTES:

1. All specified voltages are with respect to GND. Minimum DC voltage is –0.5 V on input/output pins and –0.2 V on VCC, RP#,

and VPP pins. During transitions, this level may undershoot to –2.0 V for periods <20 ns. Maximum DC voltage on

input/output pins and VCC is VCC +0.5 V which, during transitions, may overshoot to VCC +2.0 V for periods <20 ns.

2. Maximum DC voltage on V

PP and RP# may overshoot to +14.0 V for periods <20 ns.

3. Output shorted for no more than one second. No more than one output shorted at a time.

4. RP# voltage is normally at VIL or VIH. Connection to supply of VHH is allowed for a maximum cumulative period of 80 hours.

6.2

Commercial Temperature Operating Conditions

Commercial Temperature and VCC Operating Conditions

Symbol

Parameter

Notes

Min

Max

Unit

Test Condition

Operating Temperature

+70

°C

Ambient Temperature

VCC1

VCC Supply Voltage (2.7 V–3.6 V)

2.7

3.6

VCC2

VCC Supply Voltage (3.3 V ± 0.3 V)

3.0

3.6

VCC3

VCC Supply Voltage (5 V ± 5%)

4.75

5.25

VCC4

VCC Supply Voltage (5 V ± 10%)

4.5

5.5

NOTE:

Block erase, program, and lock-bit configuration with VCC < 3.0 V should not be attempted.

6.3

Capacitance(1)

TA = +25°C, f = 1 MHz

Symbol

Parameter

Typ

Max

Unit

Condition

CIN

Input Capacitance

VIN = 0.0 V

COUT

Output Capacitance

VOUT = 0.0 V

NOTE:

Sampled, not 100% tested.

28F004SC 데이터시트(PDF) 30 Page - Intel Corporation

28F004SC 데이터시트(HTML) 30 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

데이터시트 다운로드

링크 URL