UM1618 datasheet(28/51 Pages) STMICROELECTRONICS

28 / 51 page

API specification

UM1618

28/51

DocID024371 Rev 3

Return values

Troubleshooting

Comments

User should call this function periodically until the whole operation finishes.

This function can also be called inside an interrupt procedure for program/erase to take the

full advantage of interrupt. Each time the interrupt procedure is called, ‘FlashCheckStatus’

gets called to continue to complete the whole operation.

Assumptions

It assumes that the Flash block is initialized using a ‘FlashInit()’ API.

2.7.9

FlashSuspend

Description

This function checks if there is any high voltage operation being in progress on the C55

module and if this operation can be suspended. This function suspends the ongoing

operation if it can be suspended.

Prototype

UINT32 FlashSuspend (PSSD_CONFIG pSSDConfig,

UINT8 *suspendState);

Table 34. Return values for FlashCheckStatus

Type

Description

Possible values

UINT32

Successful completion or error value.

C55_INPROGRESS

C55_DONE

C55_ERROR_MODE_OP

All possible states in ‘FlashSuspend()’

All possible states in

‘FlashArrayIntegritySuspend()’

Table 35. Troubleshooting for FlashCheckStatus

Returned Error Bits

Description

Solution

C55_ERROR_MODE_OP

User provides invalid

modeOp argument.

The modeOp must be one of the values

provided on Table 33.

UM1618 데이터시트(PDF) 28 Page - STMicroelectronics

UM1618 데이터시트(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

데이터시트 다운로드

링크 URL