UM1811 datasheet(9/52 Pages) STMICROELECTRONICS

9 / 52 page

DocID026814 Rev 1

9/52

UM1811

Getting started

Figure 4. Node connection

Once the Open button has been selected (1), the trace window (2) allows checking that the

command has been correctly transmitted to the evaluation board. The G3-PLC GUI

command panel has as much tab as G3-PLC platforms are connected. To identify the tab,

the associated COM port is displayed in the panel title (3).

3.2

Node tree panel

The G3-PLC GUI offers access to the “Service Access Points” (SAP) of each layer specified

by the G3-PLC standard plus some additional features such as a bootstrap application or

the G3 library configuration.

Once a G3-PLC platform is connected, it can be explored thanks to the object tree panel.

Each root menu can be collapsed or not to see its detailed content. The detailed content

gives access to each specific SAP: PHY, MAC, ADP, BOOT and G3LIB.

Additional levels of the interface (such as IPv6) may be present. The related functions may

be used in conjunction with specific firmware projects that may be obtained from your local

support.

UM1811 데이터시트(PDF) 9 Page - STMicroelectronics