UM1811 datasheet(33/52 Pages) STMICROELECTRONICS

33 / 52 page

DocID026814 Rev 1

33/52

UM1811

ADP menu

7.3

ADPM LBP menu

The root menu offers the possibility to enter a payload and send it using the LoWPAN

bootstrap protocol (LBP), as shown in Figure 21.

These primitives are accessible only to PAN coordinator devices.

Figure 21. LoWPAN bootstrap protocol menu

From this panel, the following command may be executed:



ADPM-LBP.Request: this primitive allows the upper layer of a PAN coordinator device

to send an LBP message.

The following options are available in the panel:



Dst Address Mode: the destination address mode (BITS16: short, BITS64: extended

address)



DstAddr: the destination address



Payload type: select the hexadecimal or ASCII input mode for the NSDU



Payload content: a free text window to enter the NSDU to be sent (note that the data

has to be a valid LBP message)



Max Payload Size: a check box to configure the maximum size for the random option



Generate Random: an option to generate a random NSDU



NsduHandle: the handle associated with the NSDU to be transmitted



MaxHops: the maximum number of hops before that the LBP message is going to be

discarded



QoS: quality of the service for the NSDU (normal priority, high priority, contention free)



Discover Route option: if TRUE, a route discovery procedure will be performed prior

sending the ADP frame, as long as a route to the destination is not available in the

routing table. If FALSE, no route discovery is performed.

Confirm and indication messages are automatically generated as explained in Section 3.4

on page 12.

UM1811 데이터시트(PDF) 33 Page - STMicroelectronics

UM1811 데이터시트(HTML) 33 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

데이터시트 다운로드

링크 URL