 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
UM1811 데이터시트(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1811 데이터시트(HTML) 44 Page - STMicroelectronics |
|
|
44 / 52 page  Basic G3 operations UM1811 44/52 DocID026814 Rev 1 Figure 32. Configure Node 1 in TX For the Node 2, as shown in Figure 32, go into the PHY menu / PLME_Control panel (1) to configure the state of the node. Check the TXOFF_RXON (2) parameter and click on the PLME_SET_TRX_STATE.Request button (3). Figure 33. Configure Node 2 in RX Now that the boards are plugged in the mains and the setup has been completed, data can be sent at the PHY level, as represented in Figure 33. To do this, go to the PHY root menu of the Node 1. Select the payload type to be ASCII (1), write the “TEST” string in the free text area (2) and click on the PD_DATA.Request button (3). In the trace window, it is possible to check that the Node 2 has received the data message by checking that the PD_DATA.Indication message returned the SUCCESS status. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
