| 전자부품 데이터시트 검색엔진 |
|
UPD17708 데이터시트(PDF) 63 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD17708 데이터시트(HTML) 63 Page - NEC |
|
63 / 356 page ![]() 63 µPD17704, 17705, 17707, 17708, 17709 7.4 Cautions on Using ALU 7.4.1 Cautions on execution operation to program status word If an arithmetic operation is executed to the program status word, the result of the operation is stored to the program status word. The CY and Z flags in the program status word are usually set or reset by the result of the arithmetic operation. If an arithmetic operation is executed to the program status word itself, the result of the operation is stored to the program status word, and consequently, it cannot be judged whether a carry or borrow occurs or whether the result of the operation is zero. If the CMP flag is set, however, the result of the operation is not stored to the program status word. Therefore, the CY and Z flags are set or reset normally. 7.4.2 Cautions on executing decimal operation The decimal operation can be executed only when the result of the operation falls within the following ranges: (1) Result of addition : 0 to 19 in decimal (2) Result of subtraction: 0 to 9 or –10 to –1 in decimal If a decimal operation is executed exceeding or falling below the above ranges, the result is a value greater than 1010B (0AH). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |