| 전자부품 데이터시트 검색엔진 |
|
AN2641 데이터시트(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2641 데이터시트(HTML) 12 Page - STMicroelectronics |
|
12 / 37 page ![]() CLCD panel programmable parameters AN2641 12/37 Doc ID 14027 Rev 1 2.3.1 Display related registers 1. LCD TFT, bit [5] in the LCD-Control register, selects the display type. For TFT, set to 1. For STN, set to 0. 2. LCD Dual, bit [7] in the LCD-Control register, selects dual or single STN panel. For dual panel STN, set to 1, for single panel STN, set to 0. If TFT panel is used then set to 0. 3. LCD Mono bit [6] in the LCD-Control register, controls whether monochrome STN LCD uses a 4 or 8-bit parallel interface. Set to 0 if mono LCD uses 4-bit interface and set to 1 if mono LCD uses 8-bit interface. This bit has no meaning in other modes and must be programmed to zero. 4. LCD BW bit [4] in the LCD-Control register, selects monochrome or color STN panel. If STN LCD is monochrome (black and white), set to 1. If STN LCD is color, set to 0. This bit has no meaning in TFT mode. 5. The color palette register is described in next section. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |