PM0020 datasheet(84/87 Pages) STMICROELECTRONICS

84 / 87 page

ISC logic description

PM00020

84/87

needs time to complete and may take up to 50uS before JTAG is ready to accept the next

command.

12.5.24

Abort handling

Table 50.

Abort handling summary

Abort condition

Aborted Instruction

Abort handling

Vcc Power Down

All

None((1))

– Test-Logic-Reset

(TRST,

LVD_RESET)

– ISC_DISABLE

Isc_Program,

Isc_Program_Uc,

Isc_Program_Security

Isc_Erase

Isc_Blank_Check

1) Abort condition is latched in Micro-osc domain.

2) An abort request is sent to the Micro. The Micro operates to

switch off the pumps, to discharge the capacitances, and to clear its

own status. When Micro finishes, it sends an acknowledgment to

ISC

3) ISC resets the ISC_Algorithm and then the Flash_Interface and

all the other blocks.

Almost 50 us are required to complete the abort sequence. During

this time no instruction should be issued.

Isc_Read

1) Abort condition is latched in Micro-osc domain.

2) ISC resets the ISC_Algorithm and then the Flash_Interface and

all the other blocks.

All the abort sequence will finish within 1 us. In this time no

instruction should be issued.

The Security and Lock bits have a protection in the double program cycle.

PM0020 데이터시트(PDF) 84 Page - STMicroelectronics