| 전자부품 데이터시트 검색엔진 |
|
AN4488 데이터시트(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4488 데이터시트(HTML) 13 Page - STMicroelectronics |
|
13 / 44 page ![]() DocID026304 Rev 3 13/44 AN4488 Power supplies 43 Figure 6. PDR_ON timings example (not to scale, not needed for STM32F411xx and STM32F446xx) Selection of PDR_ON voltage supervisor Voltage supervisor should have the following characteristics • Reset output active-high push-pull (output driving high when voltage is below trip point) • Supervisor trip point including tolerances and hysteresis should fit the expected VDD range. Notice that supervisor spec usually specify trip point for falling supply, so hysteresis should be added to check the power on phase. Example: – Voltage regulator 1.8V +/- 5% mean VDD min1.71V – Supervisor specified at 1.66V +/- 2.5% with an hysteresis of 0.5% mean - rising trip max = 1.71V (1.66V + 2.5% + 0.5%) - falling trip min = 1.62V (1.66V - 2.5%). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |