HTX datasheet(21/36 Pages) RMT

21 / 36 page

OPERATING MANUAL. HTX SERIES

Page 21 of 36

All the HTX Heat Flux Sensors can be used bi-directionally. If the direction

of the heat flux is reversed, the sign of the Sensor voltage output changes

(i.e. from positive to negative). Since the sensitivity of the Sensor does not

depend on the direction of the heat flux, the measurement of the reversed

heat flux has the same accuracy.

Table 8.1: Heat flux resolution of Heat Flux Sensors of HTX series at

different voltmeter resolution (1 mV and 1 V)

Sensor type

Sensitivity,

mV/(W/m

Heat flux resolution W/m

Voltmeter

1mV

VoltmeterV

HTD04-059-08D12

0,020

HTD04-127-05D16

0,014

HTC04-126-05D20

100

0,010

HTC06-126-08D25

110

0,009

HTC06-126-08D30

130

0,008

HTC06-284-08D40

265

0,004

However, on some voltmeters the measurement of negative voltages may

not be possible or may be less accurate than the measurement of positive

voltages. Further information about the positive and negative sides of the

Sensors can be found in Section 4.

Applicability

Voltmeters are compatible with all the HTX Heat Flux Sensors without a

plug.

7.3 Ohmmeter as a read-out device of temperature

The Heat Flux Sensors of the HTX series have integrated Pt thermistors

which measure average temperature.

The thermistor is useful for experiments where it is necessary to measure

temperature simultaneously with heat flux measurements. And the

measured temperature allows making temperature corrections of Sensor

HTX 데이터시트(PDF) 21 Page - RMT Ltd.

HTX 데이터시트(HTML) 21 Page - RMT Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

데이터시트 다운로드

링크 URL