| 전자부품 데이터시트 검색엔진 |
|
HTX 데이터시트(PDF) 12 Page - RMT Ltd. |
|
|
|||||||||||||||||||||||||||||
HTX 데이터시트(HTML) 12 Page - RMT Ltd. |
|
12 / 36 page ![]() THERMOELECTRIC HEAT FLUX SENSORS Page 12 of 36 4. HEAT FLUX SENSORS INTRODUCTION 4.1 Description of installation The Sensor has two flat sides marked differently and also the cable has marking (red strip – wire #1). One side of the Sensor is marked by “+” – positive side. If the Sensor is placed with its positive side to the heat flux (Fig. 5.1), the positive voltage output will be on the Sensor’s wire #4. In other words if the positive voltage is on Connector pin #4, the heat flux comes from the positive side. And vice versa. Fig. 5.1 Direction of heat flux. 4.2 Sides of the Sensor Although the positive side is marked differently, the Sensor can work bi- directionally with the same performance. Only the direction of the output voltage will give information about the direction of the heat flux. But in the application it is simple to follow the rule – heat comes to the positive side. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |