AR0130CSSC00SPBA0-DP datasheet(11/53 Pages) ONSEMI

11 / 53 page

AR0130 DS Rev. L Pub. 6/15 EN

©Semiconductor Components Industries, LLC, 2015.

AR0130: 1/3-Inch CMOS Digital Image Sensor

Pixel Data Format

Pixel Array Structure

The AR0130 pixel array is configured as 1412 columns by 1028 rows, (see Figure 5). The

dark pixels are optically black and are used internally to monitor black level. Of the right

108 columns, 64 are dark pixels used for row noise correction. Of the top 24 rows of

pixels, 12 of the dark rows are used for black level correction. There are 1296 columns by

976 rows of optically active pixels. While the sensor's format is 1280 x 960, the additional

active columns and active rows are included for use when horizontal or vertical mirrored

readout is enabled, to allow readout to start on the same pixel. The pixel adjustment is

always performed for monochrome or color versions. The active area is surrounded with

optically transparent dummy pixels to improve image uniformity within the active area.

Not all dummy pixels or barrier pixels can be read out.

Figure 5:

Pixel Array Description

2 light dummy + 4 barrier + 24 dark + 4 barrier + 6 dark dummy

Dark pixel

Barrier pixel

Light dummy

pixel

Active pixel

2 light dummy + 4 barrier + 6 dark dummy

1412

2 light dummy + 4 barrier

2 light dummy + 4 barrier + 100 dark + 4 barrier

1028

1296 x 976 (1288 x 968 active)

4.86 x 3.66 mm2 (4.83 x 3.63 mm2)

AR0130CSSC00SPBA0-DP 데이터시트(PDF) 11 Page - ON Semiconductor